Pdr Tools / Glue Tabs (0060)

​Car Paintless Dent Repair Pdr Glue Tabs Dent Removal Puller Tabs Car Body Hail Repair Automobile Repair Tools with Pull Head Set

Specifications:

Can be in used prolong pieces, prolong pieces, prolong pieces, prolong pieces, prolong pieces, prolong pieces, prolong pieces, all kinds of metal pit plane, such as cars, washing machines, refrigerators, etc.

Suitable for dent of flat prolong pieces, prolong pieces, prolong pieces, prolong pieces, prolong pieces, prolong pieces, prolong pieces, all kinds of metal, such as surface of automobile metal plate and the washing of machine metal plate.

Quick and easy repair tool.

Repair the dent avoiding damaging the original paint.

Can be with used T bar hammer or slide hammer for good effect.

Replacement pulling tabs in different shapes and sizes for multiple purposes.

A set of 10-25-50-100pcs diverse pulling tabs for quick and easy repairing and removal the dents and ​Dings on your car.

Condition: 100% Brand new and high quality.

Material: Plastic

Color: RANDOM

How to use:

1- Clean the dent with a clean cloth.

2- Mount the glue stick into the glue gun and preheat for 5 minutes.

3- To Chose a proper gasket. Large dent requires a large gasket. (Note: The larger the drawing gasket is, the larger the drawing force is).

4- Pull the trigger and apply the drawing gasket extruded with glue (The 4 holes of gasket should be applied with hot melt glue).

5- Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres, cooling for about 8 minutes. (The time should be less than 10 minutes and shorter slightly in winter).

6- Press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up dent;

7- Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen.

8- Clean the repaired place with a clean wet cloth.